Premium Quality

Padi3D Standard PLA Filament

Professional-grade 3D printing filament with superior strength, precision, and vibrant colors.

Available Colors:

Shopee

Lazada

Tiktok

Premium Features

Discover why professional makers choose our filament for their critical projects

Balanced Performance

Combining Rigidity and Toughness. Standard PLA is a perfect blend of strength and flexibility. Engineered to withstand impacts and resist cracking, it's built for long-lasting durability.

No Warping or Curling

Contact surface does not warp or curl at the edges. The warping rate of standard PLA molded parts is close to 0, and the contact surface with the printing platform is not prone to warping and deformation.

Good Melt, No Clog

Smooth printing at 205°C ± 10°C

Highly Precise

Using an advanced filament diameter tester to precisely control the filament diameter, keeping the tolerance within 1.75±0.02mm.

Easy-to-remove Supports

The supports of printed parts can be easily peeled off the surface, leaving no residue on the support contact surface, and reducing post-processing time.

Supports High-Speed Printing

Standard PLA can be used with high-speed printers, with a maximum printing speed (infill) of up to 450mm/s.

Technical Specifications

Detailed specifications of Standard PLA

Property	Value	Test Standard
Material	PLA (Polylactic Acid)	—
Diameter	1.75 ± 0.02 mm	—
Weight	1 kg	—
Length	330 m	—
Density	1.25 g/cm³	—
Tensile Strength	56 MPa	ASTM D638M
Flexural Strength	76.7 MPa	ASTM D790
Flexural Modulus	2100 MPa	ASTM D790
Heat Deflection Temperature	53°C	ASTM D648
Elongation at Break	4 - 6 %	ASTM D638M
Impact Strength	38 J/m	ASTM D256
Shore Hardness	81 Shore D	ASTM D2241
Water Absorption Rate	0.1 - 0.3 %	ASTM D570
Shrinkage Rate (XY Direction)	X: -0.1 %, Y: 0.1 %	—

All values are measured under standard laboratory conditions and may vary in different printing environments.

Recommended Printing Parameter

Suggested printing parameters for optimal printing results

205 ± 10°C

Printing Temperature

60 ± 5°C

Bed Temperature

70-100%

Cooling Fan

0.96

Flow Rate

50 mm/s

First Layer Printing Speed

105 mm/s

First Layer Infill Speed

200 mm/s

Outer Wall Printing Speed

350 mm/s

Inner Wall Printing Speed

450 mm/s

Infill Printing Speed

200 mm/s

Top Layer Infill Speed

How to reload into your spool

Rotate to open the spool

Rotate to open the spool, align the protrusions on the spool with the indentations on the filament.

Insert and lock the spool

Insert the other half of the spool into the slot and rotate to lock the spool.

Secure the filament

After locking the spool, remove the cable tie and secure the filament end in the hole on the spool.

Experiment Results

Our rigorous testing demonstrates exceptional performance

High-Speed Printing Capability

Standard PLA can be used with high-speed printers, with a maximum printing speed (infill) of up to 450mm/s

Parameters	Other PLA	Standard PLA
Product	Other PLA	Standard PLA
Print Time	2h 18m	50m
Nozzle Temp	205°C	201°C
Max Volume Speed	12 mm³/s	22 mm³/s
Outer Wall Speed	50 mm/s	200 mm/s
Infill Speed	80 mm/s	450 mm/s